J D Electricals

Available with us is a quality-proved gamut of products   which manufactured with the use of quality grade raw material.

A flameproof push button is a type of electrical switch that is designed to be used in hazardous environments where flammable gases, vapors, or dusts may be present. These push buttons are specifically constructed to prevent the ignition of these materials in the event of an electrical fault, such as a spark or heat generated by the switch during operation.

Key features and considerations for flameproof push buttons:

1. Ex-Proof (Explosion Proof): Flameproof push buttons are classified as "Ex" (explosion proof) according to international standards (such as IEC-60079-1 :2007), meaning they are designed to contain any internal explosion and prevent it from igniting the surrounding hazardous atmosphere.

2. Durable Construction: They are typically made of materials like cast aluminum or stainless steel with thick, rugged enclosures. The button itself may be sealed to ensure no gases or dust can enter the device.

3. Applications: These switches are commonly used in industries such as oil and gas, chemical plants, mining, and any area where there is a risk of flammable materials being present in the atmosphere.

4. GAS Group:- IIA , IIB

    

5. IP Rating:-IP 65 As per IS/IEC60529-2001

Available with us is a quality-proved gamut of products   which manufactured with the use of quality grade raw material.

 FLP / WP DOL Starter Upto 10HP.
 Rating: Upto 10 H.P.
220V / 415 Volts AC 50 / 60Hz.
Green Push Button START: With 1 NO Contact element for 10 AMP
Red Push Button STOP: Mushroom Head Pad Lock with 1 NC Contact 10AMP
Ex-Protection: AS PER IS / IEC-60079-1:2007
Gas Group: I, IIA, IIB
IP Protection: IP-65 IS / IEC60529-2001
Hardware: Stainless Steel